Back to Blog
    Sécurité dans la construction

    Plans de protection contre les chutes en Afrique du Sud : guide de conformité au règlement 9 de la construction

    OHS Compliance Group
    4 March 2026
    16 min de lecture

    Falls: Construction's Deadliest Hazard

    Falls from height account for approximately 30% of all construction fatalities in South Africa. Despite clear regulatory requirements, many construction sites operate with inadequate or non-existent fall protection plans.

    The Construction Regulations (2014), specifically Regulation 9, mandate that every construction site where work is performed at a height of 2 metres or more must have a documented fall protection plan.

    Regulation 9: The Legal Requirements

    What the Regulation Requires:

    1. A fall protection plan developed by a competent person before work at height commences
    2. The plan must be site-specific — generic templates don't satisfy the legal requirement
    3. Workers must be trained on the fall protection plan before starting work
    4. Fall protection equipment must comply with SANS standards
    5. Regular inspections of all fall protection equipment and anchor points

    Who Is a "Competent Person"?

    The Construction Regulations define a competent person as someone who:

    • Has appropriate qualifications (NQF Level 4 or above in a relevant field)
    • Has been trained in fall protection plan development
    • Has practical experience in fall protection systems
    • Is designated in writing by the contractor

    Components of a Fall Protection Plan

    A compliant fall protection plan must include:

    1. Site Assessment

    • Identification of all areas where work at height will occur
    • Height measurements and duration of exposure
    • Environmental factors (wind, rain, lighting)
    • Access and egress routes

    2. Risk Assessment

    • Hazard identification for each elevated work area
    • Risk rating using likelihood × severity matrix
    • Edge protection requirements
    • Fragile surface identification

    3. Control Measures (Hierarchy)

    • Eliminate: Can the work be done from ground level?
    • Guardrails: Fixed edge protection systems
    • Travel restraint: Prevents workers reaching the edge
    • Fall arrest: Catches workers who fall (harnesses, lanyards, lifelines)
    • Fall containment: Safety nets, airbags
    • Administrative: Permit systems, supervision, training

    4. Equipment Specifications

    • Full body harness: SANS 50361
    • Lanyards: SANS 50354
    • Anchor points: Minimum 22kN strength rating
    • Safety nets: SANS 1636
    • Guardrails: Minimum 900mm height, capable of withstanding 1.25kN

    5. Rescue Plan

    • Procedures for rescuing a suspended worker within 6 minutes
    • Trained rescue team identified
    • Rescue equipment specified and available
    • Emergency services contact details

    6. Training Records

    • All workers trained on the specific fall protection plan
    • Equipment inspection competence verified
    • Refresher training schedule

    Common Non-Compliance Issues

    The Department of Labour frequently cites construction sites for:

    1. No fall protection plan at all — Immediate prohibition notice
    2. Generic plan not site-specific — Doesn't satisfy Regulation 9
    3. Untrained workers working at height
    4. Expired or damaged equipment still in use
    5. No rescue plan — particularly dangerous as suspended workers can die within minutes
    6. No competent person appointed in writing

    Penalties

    Non-compliance with Regulation 9 can result in:

    • Prohibition notice — All work at height stops immediately
    • Contravention notice — Fine and corrective action deadline
    • Criminal prosecution — If a fatality or serious injury occurs
    • Civil liability — Negligence claims from injured workers

    OHS Compliance Group's Fall Protection Training

    We offer comprehensive fall protection training:

    • Fall Protection Plan Writer Course — Qualify to develop compliant plans
    • Working at Heights Certification — For all workers operating above 2m
    • Scaffold Erector/Inspector Training — Critical for scaffold-dependent sites
    • NEBOSH ICC — International construction safety qualification covering fall protection
    • Corporate Site Assessments — Our consultants review your fall protection compliance

    We've developed fall protection plans for projects ranging from Transnet rail infrastructure to Eskom power station maintenance programmes.

    Book fall protection training or view construction safety courses.

    Prêt à commencer votre parcours NEBOSH ?

    Join 60,000+ professionals who've earned their health & safety qualifications with OHS Compliance Group.

    Related Articles

    Qualifications NEBOSH

    Received a Refer result in a NEBOSH unit? How results and grades work across NEBOSH qualifications, how resits work (using the IGC as an example), Enquiries About Results and practical ways to give yourself a better chance of passing.

    28 Oct 2026
    10 min de lecture
    Lire
    Qualifications NEBOSH

    Tout ce que vous devez savoir sur le NEBOSH International General Certificate : débouchés professionnels, déroulement des examens et raisons pour lesquelles il est indispensable aux préventeurs SST en Afrique du Sud.

    15 déc. 2024
    8 min de lecture
    Lire
    Conseils d'orientation professionnelle

    Vous hésitez entre le NEBOSH IGC et l'International Diploma ? Cette comparaison détaillée aide les professionnels sud-africains à choisir la qualification en santé et sécurité adaptée à leurs objectifs de carrière.

    10 déc. 2024
    6 min de lecture
    Lire

    Support SST

    Nous répondons généralement instantanément

    Bonjour ! 👋 Je suis là pour vous aider à trouver le cours NEBOSH idéal. Que souhaitez-vous savoir sur nos formations en santé et sécurité ?